产品安装与保养说明

产品安装与保养说明

了解如何安装、清洁和保养3M™屏幕防窥与保护产品。

Choose your device to view the appropriate install instructions.


Application Videos

Watch step-by-step instructions and tips for attaching and cleaning 3M™ Privacy and Protection Products by device type.


贴附胶条

配件描述

请先将胶条直接贴在防窥片上,再将防窥片安装至屏幕前 。 贴附胶条可清洗,亦可取下,您可以取下防窥片并重新安装。

安装与保养


Instructional illustration of hanger arm installation

清洁方式简单容易


  1.  将屏幕防窥片或屏幕保护产品从装置上取下。
  2.  使用无尘软布沾一点水,擦去指纹、污渍与灰尘。
  3.  确认屏幕防窥片或屏幕保护产品干燥后即可重新安装回屏幕。
滑动装置贴片

配件描述

滑动装置贴片可轻松贴附并固定于屏幕侧边,让您能够依需求滑动屏幕防窥片与屏幕保护产品或将其取下。

安装与保养


Instructional illustration of slide mount tab installation

 

清洁方式简单容易

3M™ 屏幕防窥与保护产品可以重复清洁,而不影响画面的清晰度和使用效果。


  1. 将屏幕防窥片或屏幕保护产品从装置上取下。
  2. 使用无尘软布沾一点水,擦去指纹、污渍与灰尘。
  3. 确认屏幕防窥片或屏幕保护产品干燥后即可重新安装回屏幕。
屏幕保护贴背胶

配件描述

此贴附配件具有黏性,撕取时不留残胶,可直接使用于您的屏幕。采用边缘不沾黏的科技,不会附著尘埃、脏污。

安装与保养

智慧型手机


Instructional illustration of adhesive backed installation

平板电脑


Instructional illustration of adhesive backed installation

技巧与要点


  • 为顺利贴附,请以干净布料包住刮板的直边。将布按住不动,并按照步骤进行。
  • 3M™屏幕保护产品为您的屏幕提供一层轻薄、耐磨的防护。
  • 3M的不残留黏胶,表示保护膜很容易贴上,取下亦不会残留。

清洁方式简单容易

3M™ 屏幕防窥与保护产品可以重复清洁,而不影响画面的清晰度和使用效果。

边角固定贴片

配件描述

有黏性的边角固定贴片可轻松贴附于屏幕,此贴片经过特殊设计,可重复清洗,取下时不留痕迹。

安装与保养


Instructional illustration of corner tab installation

 

最佳化使用的小技巧


  • 避免将有黏性的边角贴片贴在对触控敏感的区域。
  • 为取得最清晰画质,请将3M™ 屏幕防窥片光面朝外。
  • 当处于环境光源较强的地方,请将防窥面雾面朝外,以改善眩光。

清洁方式简单容易

3M™ 屏幕防窥与保护产品可以重复清洁,而不影响画面的清晰度和使用效果。


  1. 将屏幕防窥片或屏幕保护产品从装置上取下。
  2. 使用无尘软布沾一点水,擦去指纹、污渍与灰尘。
  3. 确认屏幕防窥片或屏幕保护产品干燥后即可重新安装回屏幕。

Monitor Attachment Options

Some attachment parts are not included with all filters.

3M™ COMPLY™ Magnetic Attach for Monitors*

Installation instructions

3M™ COMPLY™ Magnetic Attach for Monitors

The 3M™ COMPLY™ Magnetic Attach for Monitors allows you to quickly and easily switch from world-class privacy to screen sharing.

Installation Video

Watch this video for quick and clear instructions on how to install your COMPLY magnetic attach for monitors.


COMPLY™显示器磁性配件的安装说明

使用方法

  • COMPLY™显示器磁性配件安装说明第1步
  • COMPLY™显示器磁性配件安装说明第2步
  • COMPLY™显示器磁性配件安装说明第3步
  • COMPLY™显示器磁性配件安装说明第4步
  • COMPLY™显示器磁性配件安装说明第5步
  • COMPLY™显示器磁性配件安装说明第6步
  • COMPLY™显示器磁性配件安装说明第7步
  • COMPLY™显示器磁性配件安装说明第8步

warning exclamation mark icon

WARNING:

*To reduce the risks associated with magnets and implanted medical device interference which, if not avoided, could result in serious injury or death: magnetic attachment bracket contains high strength magnets. Keep away from implanted medical devices to help prevent interference, as medical devices such as implanted pacemakers and defibrillators might contain sensors that respond to magnets when in close contact. Consult your medical professional for information specific to your medical device and whether you need to maintain a safe distance of separation between your medical device and the magnetic attachment.

Hanger Arms

Description

Hanger arms snap onto 3M™ Framed Privacy Filters and then rest on the top of a monitor, allowing for easy removal, cleaning and reattachment.

How to Apply

  • Illustration showing how to attach a hanger arm to the top of a framed privacy filter
  • Illustration of a hanger arm clipped onto a framed privacy filter
  • Illustration of a hanger arm sliding across the top of a framed privacy filter
  • Illustration showing how to attach a framed privacy filter to monitor screen by the hanger arms
  • Illustration of a monitor attached with a framed privacy filter

Note: The red dot indicates the front of the filter.


  • Clip hanger arms onto filter with arms extending back toward the monitor.
  • Hanger arms are secured if you can slide them from side to side.
  • Hold filter by the sides of the frame when removing or reapplying.
  • Allow hanger arms to rest on top of the monitor.

Tips for Optimizing Use


  • To raise the filter height, apply foam pads enclosed in your package.
  • Some 3M™ Framed Privacy Filter models allow you to replace hanger arms with easy-on, easy-off Command™ Strips.
  • Remove filter from device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
Command™ Strips

Description

Command™ Strips connect together when attached to both the front of your monitor frame and the back of a 3M™ Framed Privacy Filter. Offers a secure solution while allowing for easy removal, cleaning and reattachment.

How to Apply

  • Illustration of Command Strips
  • Illustration of Command Strips attached to back of a framed privacy filter
  • Illustration showing how to apply framed privacy filter to monitor screen by Command Strips

Note: The red dot indicates the front of the filter (Side A)


  • Separate Command™ Strips and connect them by folding in half, pressing firmly until they snap together.
  • Peel off liner from one side of the connected strips. Attach to the back of the filter frame with the rounded tab facing the outside edge.
  • Press firmly and repeat on all four corners.
  • Remove remaining liners and bring filter to monitor, lining it up so the strips attach to the bezel (frame) and not the screen. Press firmly.

How to Remove

  • Illustration showing how to remove framed privacy filter from monitor screen
  • Illustration showing how to reattach framed privacy filter to monitor screen
  • Gently pull the filter away from the monitor edges to disconnect the Command™ Strips from each other.
  • Reattach the filter to the monitor by lining up the Command™ Strips in each corner. Press firmly to connect.
  • Illustration showing how to remove framed privacy filter from monitor screen
  • Illustration showing how to slowly remove Command Strips
  • For permanent Command™ Strip removal, detach the filter from the monitor and use the rounded tabs to slowly stretch the strips until the adhesive releases (as shown).

Tips for Optimizing Use


  • Some 3M™ Framed Privacy Filter models allow you to replace hanger arms with easy-on, easy-off Command™ Strips.
  • Remove filter from device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
Attachment Strips

Description

Ideal for displays with edge-to-edge glass, optically clear attachment strips are applied directly onto the filter before attaching to the device screen. Washable and removable, attachment strips allow for easy filter removal, cleaning and reattachment.

  • Illustration of attachment strips on a privacy filter for laptops
  • Illustration of attachment strips on a privacy filter for touchscreen devices and tablets
  • Illustration of attachment strips on a privacy filter for monitors

How to Apply


  • Illustration of attachment strips
  • Illustration of attachment strip lining up to edge of privacy filter
  • Illustration of attachment strip applying to privacy filter by pressing
  • Illustration showing how to remove liners from attachment strips after application
  • Illustration of a privacy filter attaching to screen by attachment strips

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.


  • Peel off strip from the clear backing.
  • Apply strip to one edge on the back of the filter.
  • Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
  • Apply all required strips before peeling off blue liners.
  • Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove


  • Use the thumb notch to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
  • Clean attachment strips by running them under water and rubbing with your finger. Let dry before reattaching to display.
Slide Mount Tabs

Description

Slide mount tabs attach onto the device bezel bordering your display and stay in place, allowing you to slide the filter on and off the screen as needed.

How to Apply

  • Illustration of slide mount tabs
  • Illustration showing how to peel slide mount tabs
  • Illustration of slide mount tabs positioned and adhered to bezel around computer screen
  • Illustration showing how to attach privacy filter to screen by using slide mount tabs
  • Illustration showing how to attach privacy filter to screen by using slide mount tabs

Note: Depending on display size, you may not need to use all slide mount tabs provided.


  • Separate slide mount tabs by size, starting with two large tabs for the base.
  • Peel off liner to reveal the adhesive.
  • Position large tabs on bottom corners so the adhesive attaches onto the device bezel and the tab edges hang over the screen.
  • Position small tabs on the sides so the adhesive attaches onto the device bezel and the tab edges hang over the screen.
  • Slide filter into place.
  • Optional: Place additional tabs on the device bezel above the filter to lock it into place.

How to Remove


  • For permanent removal or to replace slide mount tabs, grab onto the non-adhesive tab and slowly peel.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

Laptop Attachment Options

Some attachment parts are not included with all filters.

3M™ COMPLY™ Adhesive Strips

Installation instructions

3M™ COMPLY™ Adhesive Strips

  • Bright screen privacy filter shown attached to laptop screen with four COMPLY adhesive strips
    Option A
  • Bright screen privacy filter shown attached to laptop screen with six COMPLY adhesive strips
    Option B

How to apply

  • Attaching hinges to COMPLY™ attachment bezel fit
  • Attaching COMPLY™ attachment bezel fit to laptop
  • Applying optional flip tab for  COMPLY™ attachment bezel fit
  • Remove plastic backing from COMPLY adhesive strips
  • Apply filter bottom to top with COMPLY adhesive strips facing laptop screen.

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.

1. Peel off strip from the white backing.
2. Apply strip to one edge on the back of the filter.
3. Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
4. Apply all required strips before peeling off brown liners.
5. Position the filter based on the diagram for your display type.
6. Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove
 

  • Use the notch cut-out to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

Attachment Strips

Description

Ideal for displays with edge-to-edge glass, optically clear attachment strips are applied directly onto the filter before attaching to the device screen. Washable and removable, attachment strips allow for easy filter removal, cleaning and reattachment.

  • Illustration of attachment strips on a privacy filter for laptops
  • Illustration of attachment strips on a privacy filter for touchscreen devices and tablets
  • Illustration of attachment strips on a privacy filter for monitors

How to Apply


  • Illustration of attachment strips
  • Illustration of attachment strip lining up to edge of privacy filter
  • Illustration of attachment strip applying to privacy filter by pressing
  • Illustration showing how to remove liners from attachment strips after application
  • Illustration of a privacy filter attaching to screen by attachment strips

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.


  1. Peel off strip from the clear backing.
  2. Apply strip to one edge on the back of the filter.
  3. Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
  4. Apply all required strips before peeling off blue liners.
  5. Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove


  • Use the thumb notch to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use


  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.
  • Clean attachment strips by running them under water and rubbing with your finger. Let dry before reattaching to display.
3M™ COMPLY™ Flip Attach - Bezel

Installation instructions

3M™ COMPLY™ Flip Attach for Raised Bezel Fit

(for laptops with a raised bezel)

The 3M™ COMPLY™ Flip Attach for Raised Bezel Fit allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for raised bezel fit.

COMPLY™ 装置-边框安装示例

使用方法

备注:您的COMPLY固定装置配有两个铰链。每一铰链包括一个透明的粘胶端和一个黑色的粘胶端。透明端与防窥膜连接,黑色端与笔记本电脑的边框连接。

  • 将铰链嵌入COMPLY™ 边框固定装置
    1.将铰链安装至防窥膜
    • 撕下覆盖第一个铰链透明端的离型纸
    • 将露出的粘胶粘在防窥膜的顶部前侧,距离右边缘约一英寸。请确保将铰链的黑色端对准防窥膜顶端
    • 重复上述步骤,将第二个铰链安装至左侧
  • 将COMPLY™ 边框固定装置安装至笔记本电脑
    2.将防窥膜安装至笔记本电脑
    • 撕下覆盖于铰链黑色端的离型纸
    • 将防窥膜放在笔记本电脑的凸起边框内,防窥膜黑色端需置于电脑屏幕顶部边框上方
    • 施加压力,确保粘合
  • 适用于COMPLY™ 边框固定装置的可选翻转贴片
    3.适用的可选翻转贴片
    • 可选翻转贴片使其能轻松地从屏幕防窥切换到屏幕共享状态,同时不留指纹
    • 撕下翻转贴片上的离型纸,贴在防窥膜背面右侧或左侧

How to Remove
 

  • Like peeling tape off a box, use a fingernail to peel back the edge of a COMPLY attachment. Then use your finger to roll up the adhesive. The adhesive is designed to remove cleanly after use. In the event adhesive residue remains, this can be removed using IPA or other adhesive removers, and a cleaning cloth.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

3M™ COMPLY™ Flip Attach - Universal

Installation instructions

3M™ COMPLY™ Flip Attach for Full Screen Universal Fit

(for laptops with flat front glass)

The 3M™ COMPLY™ Flip Attach for Full Screen Universal Fit allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for full screen universal fit.

COMPLY™ 装置-通用型的安装示例

使用方法

备注:您的COMPLY固定装置配有两个铰链。每一铰链包括一个透明的粘胶端和一个印刷的粘胶端。透明端与防窥膜连接,印刷端与笔记本电脑盖子连接。

  • 将铰链嵌入COMPLY™ 通用装置
    1.将铰链安装至防窥膜
    • 撕下覆盖第一个铰链透明端的离型纸
    • 将露出的粘胶粘在防窥膜的顶部前侧,距离右边缘约一英寸。请确保铰链上的黑色边框对准防窥膜顶部
    • 重复上述步骤,将第二个铰链安装至左侧
  • 将COMPLY™ 通用型装置安装至笔记本电脑
    2.将防窥膜安装至笔记本电脑
    • 撕下铰链印刷端的离型纸,将防窥膜的顶部对准活动显示器顶部
    • 将铰链从上方绕至笔记本盖子的背面
    • 施加压力,确保粘合
  • 适用于COMPLY™ 固定装置-通用型的可选翻转贴片
    3.适用的可选翻转贴片
    • 可选翻转贴片使其能轻松地从屏幕防窥切换到屏幕共享状态,同时不留指纹
    • 撕下翻转贴片上的离型纸,贴在防窥膜背面右侧或左侧

3M™ COMPLY™ Flip Attach - Custom

Installation instructions

3M™ COMPLY™ Flip Attach for Custom Fit

(for laptops with flat front glass)

The 3M™ COMPLY™ Flip Attach for Custom Fit allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for custom fit.

COMPLY™ 装置-定制型的安装示例

使用方法

备注:您的COMPLY固定装置配有两个铰链。每一铰链包括一个透明的粘胶端和一个印刷的粘胶端。透明端与防窥膜连接,印刷端与笔记本电脑盖子连接。

  • 将COMPLY™ 定制型装置安装至笔记本电脑
    1.将铰链安装至防窥膜
    • 撕下覆盖第一个铰链透明端的离型纸
    • 将露出的粘胶粘在防窥膜的顶部前侧,距离右边缘约一英寸。请确保铰链上的黑色边框对准防窥膜顶部
    • 重复上述步骤,将第二个铰链安装至左侧
  • 适用于COMPLY™ 固定装置-定制型的可选翻转贴片
    2.将防窥膜安装至笔记本电脑
    • 撕下铰链印刷端的离型纸,将防窥膜顶部对准笔记本电脑屏幕顶部
    • 将铰链从上方绕至笔记本盖子的背面
    • 施加压力,确保粘合
  • 适用于COMPLY™ 固定装置-定制型的可选翻转贴片
     3.适用的可选翻转贴片
    • 可选翻转贴片使其能轻松地从屏幕防窥切换到屏幕共享状态,同时不留指纹
    • 撕下翻转贴片上的离型纸,贴在防窥膜背面右侧或左侧

How to Remove
 

  • Like peeling tape off a box, use a fingernail to peel back the edge of a COMPLY attachment. Then use your finger to roll up the adhesive. The adhesive is designed to remove cleanly after use. In the event adhesive residue remains, this can be removed using IPA or other adhesive removers, and a cleaning cloth.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.

3M™ COMPLY™ Flip Attach - MacBook computers

Installation instructions

3M™ COMPLY™ Flip Attach for MacBook Computers

(for laptops with flat front glass)

The 3M™ COMPLY™ Flip Attach for MacBook Computers allows you to quickly and easily switch from world-class privacy to screen sharing with one simple flip.

Installation Video
Watch this video for quick and clear instructions on how to install your COMPLY flip attach for MacBook computers.

COMPLY™ 装置-Macbook安装示例

使用方法

备注:您的COMPLY固定装置配有两个铰链。每一铰链包括一个透明的粘胶端和一个印刷的粘胶端。透明端与防窥膜连接,印刷端与笔记本电脑盖子连接。

  • 将铰链安装至Macbook的COMPLY™ 固定装置
    1.将铰链安装至防窥膜
    • 撕下覆盖第一个铰链透明端的离型纸
    • 将露出的粘胶粘在防窥膜的顶部前侧,距离右边缘约一英寸。请确保铰链上的黑色边框对准防窥膜顶部
    • 重复上述步骤,将第二个铰链安装至左侧
  • 将COMPLY™ 固定装置安装至Macbook
    2.将防窥膜安装至笔记本电脑
    • 撕下铰链印刷端的离型纸,将防窥膜顶部对准笔记本电脑屏幕顶部
    • 将铰链从上方绕至笔记本盖子的背面
    • 施加压力,确保粘合
  • 适用于Macbook COMPLY™ 固定装置的可选翻转贴片
     3.适用的可选翻转贴片
    • 可选翻转贴片使其能轻松地从屏幕防窥切换到屏幕共享状态,同时不留指纹
    • 撕下翻转贴片上的离型纸,贴在防窥膜背面右侧或左侧

How to Remove
 

  • Like peeling tape off a box, use a fingernail to peel back the edge of a COMPLY attachment. Then use your finger to roll up the adhesive. The adhesive is designed to remove cleanly after use. In the event adhesive residue remains, this can be removed using IPA or other adhesive removers, and a cleaning cloth.

Tips for Optimizing Use
 

  • Remove the filter from the device before cleaning and moisten a soft, lint-free cloth with ammonia-free glass cleaner to wipe away fingerprints, smudges and dust.


Tablet Attachment Options

Some attachment parts are not included with all filters and screen protectors.

Attachment Strips

Description

Ideal for displays with edge-to-edge glass, optically clear attachment strips are applied directly onto the filter before attaching to the device screen. Washable and removable, attachment strips allow for easy filter removal, cleaning and reattachment.

  • Illustration of attachment strips on a privacy filter for laptops
  • Illustration of attachment strips on a privacy filter for touchscreen devices and tablets
  • Illustration of attachment strips on a privacy filter for monitors

How to Apply

  • Illustration of attachment strips
  • Illustration of attachment strip lining up to edge of privacy filter
  • Illustration of attachment strip applying to privacy filter by pressing
  • Illustration showing how to remove liners from attachment strips after application
  • Illustration of a privacy filter attaching to screen by attachment strips

Note: Depending on the size of your display, you may not need to use all attachment strips. For larger than average displays, use additional strips provided in your package and apply as instructed.


  1. Peel off strip from the clear backing.
  2. Apply strip to one edge on the back of the filter.
  3. Attach slowly and run your finger across strip to remove bubbles and adhere to filter.
  4. Apply all required strips before peeling off blue liners.
  5. Avoid touching the adhesive as you line filter up and attach to screen.

How to Remove


  • Use the thumb notch to grab hold of the filter and slowly pull it towards you to remove from the display.
  • For permanent removal or to replace attachment strips, use a fingernail to peel back the edge of a strip, then roll up the adhesive.

Tips for Optimizing Use


  • Clean attachment strips by running them under water and rubbing with your finger. Let dry before reattaching to display.
Adhesive-Backed

Description

A screen protector applies directly to your device screen with a residue-free adhesive that removes cleanly. Stay-clean edge technology helps keep edges free from dust and grime.

How to Apply

  • Illustration showing how to wipe tablet screen with microfiber cloth
  • Illustration of peeling back screen protector at edge
  • Illustration showing how to slowly apply screen protector to tablet
  • Illustration of applicator pressing down to attach screen protector to device
  • Illustration of applicator pushing air bubbles out to edge of screen protector
  • Illustration showing how to clean privacy screen protector

Note: Turn off device and remove from case before applying screen protector.


  1. Gently clean your screen with a microfiber cloth.
  2. Begin by slowly peeling back the liner.
  3. Carefully line the screen protector up to device edges before applying.
  4. While slowly removing liner, bend the screen protector back and firmly flatten it onto the screen. Tip: If you notice debris under the screen protector, slowly lift it back up and remove the dust particle. Use a piece of tape if needed.
  5. Use the applicator to push any air bubbles out to the edges.
  6. Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.

How to Remove


  • For permanent removal, use your fingernail to lift a corner of the screen protector and slowly peel it off the device screen.
  • Use a soft, lint-free cloth to easily remove any remaining residue.

Tips for Optimizing Use


  • Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.

Smartphone Attachment Options

Some attachment parts are not included with all screen protectors.

Adhesive-Backed

Description

A screen protector applies directly to your device screen with a residue-free adhesive that removes cleanly. Stay-clean edge technology helps keep edges free from dust and grime.

How to Apply

  • Illustration showing how to wipe smartphone screen with microfiber cloth
  • Illustration of peeling back screen protector at edge
  • Illustration showing how to slowly apply screen protector to smartphone
  • Illustration of applicator pressing down to attach screen protector to device
  • Illustration of applicator pushing air bubbles out to edge of screen protector
  • Illustration showing how to clean privacy screen protector

Note: Turn off device and remove from its case before applying.


  1. Gently clean your screen with a microfiber cloth.
  2. Begin by slowly peeling back the liner.
  3. Carefully line the screen protector up to device edges before applying.
  4. While slowly removing liner, bend the screen protector back and firmly flatten it onto the screen. Tip: If you notice debris under the screen protector, slowly lift it back up and remove the dust particle. Use a piece of tape if needed.
  5. Use the applicator to push any air bubbles out to the edges.
  6. Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.

How to Remove


  • For permanent removal, use your fingernail to lift a corner of the screen protector and slowly peel it off the device screen.
  • Use a soft, lint-free cloth to easily remove any remaining residue.

Tips for Optimizing Use


  • Fingerprints and smudges wipe away cleanly with a soft, lint-free cloth.

Installation instructions for 3M™ COMPLY™ Privacy Filter Attach Solutions

3M™ COMPLY™ Magnetic Attach for Monitors


3M™ COMPLY™ Attachment System - Bezel Type


3M™ COMPLY™ Attachment System - Full Screen Universal


3M™ COMPLY™ Attachment System - for MacBook Computers


3M™ COMPLY™ Attachment System - Custom